How to use LED motif light
First, carefully read the device to clarify, and then follow the device to clarify according to the lighting.
Second, do not change the structure of the lamp during the cleaning and protection. Install the lamp as it is.
Third, do not frequently switch, will affect the LED lamp internal electronic components life.
Fourth, LED lamps should be avoided in wet environments. The wet environment affects the electronic components that drive the LED lamp.
LED motif maintenance method
1. Moisture protection is the key to lighting maintenance, to prevent rust damage or short circuit.
2. It is best not to clean the LED lights with water. Do not wipe them with a wet rag immediately after turning on the lights.
3. Usually LED lights can not be used in the dimmer lamp, delay switch, sensor switch circuit.
4. To prevent the use of high temperature and humidity in the environment, LED lighting fixtures are usually used in the ambient temperature of 5 ~ 40 °C.
5. LED lighting is mainly powered inside, non-professionals do not assemble and disassemble themselves.
6. Metal parts of LED lighting can not be free to use brightening powder and other chemicals, the back of the dust should use a dry cloth or tweezers to clean.