Lights String LED C9 Strawberry Lights

Lights String LED C9 Strawberry Lights

1.Product Features for lights string led C9 strawberry lights: The Beautiful, high - end, generous, elegant; The Products are used 8MM RGBFull lanternsBeads; The Wire and shell selection of cold, anti UV , Flame retardant materials, suitable for long-term outdoor use, protection level IP6 8; The...

Product Details

  1. 1.Product Features for lights string led C9 strawberry lights:

TheBeautiful, high - end, generous, elegant;

TheProducts are used8MM RGBFull lanternsBeads;

TheWire and shell selection of cold, antiUV, Flame retardant materials, suitable for long-term outdoor use, protection levelIP68;

TheUsing Taiwan waferledChip, with high brightness, good light color consistency, good color saturation, good stability and so on

TheLow pressure5V / 12VSafe and energy saving, long life, low attenuation, energy saving and other characteristics;

TheuseABResin plastic potting, mechanical strength, product protection level is high

2.Applications:

Christmas decoration, home decoration, garden decoration, bar, various places.

3.Product Size:

 

4. Product parameters and the use of the environment

Serial number

project

parameter

1

Drive mode

Constant Current Driver

2

Input voltage

DC12V

3

power

0.6W

4

Number of LED lights

F8RGB

5

Chip brand

Taiwan wafer

5

shell material

PVC

6

Dimensions

C7-C9-G40-G27

7

Hole Size


8

Protection class

IP68

9

Working temperature

-20 ~ + 60

10

The distance of a single lamp


11

control method

External control

12

Service life

50000H

13

Weight / string


14

product preserve period

2year

15

Storage temperature

-30 to + 80 ° C

16



5.Wiring diagram:

 

6.Installation Notes:

TheThe rated voltage of a single string is0.5 VBetween the rated current20mA,rated power0.24W;

TheConstant voltage power supply output voltage can not be higher than the rated voltage,Otherwise it will cause damage to the lamp;

TheMust use the product packageledDrive power, not supporting the drive power may cause damage to the lamp;

ThewillRed lineConnected to the positive pole of the power supply,blueLine connected to the negative power supply, every 50 lights connected to the power line to the main line;

TheAll the connections at the installation of waterproof, insulation treatment, check the correct before power;

TheThe diameter of the opening is12mm, The center of the pitch3.5cm-5.0cmIt is appropriate, depending on the size of the logo, the installation height is determined, usually the perforated word per square meter300-500Stars.

7.Common troubleshooting:

(one),Phenomenon: allledFlashing

problem:A, Poor contact.

B,someledSwitching power supply has overload protection function, when connectedledMore than its power will flash warning.

Solution:A, Find loose place to re-fixed or plug.

B, Replace the power moreledSwitching power supply.

(B), the phenomenon:ledDim

problem:A,ledThe polarity is reversed.

B,ledSeries too long.

C, Switching power supply andledVoltage label is inconsistent.

D,ledLight-emitting chip light failure.

Solution:A, To ensure that the positive and negative wiring is correct.

B,cut backledConnection.

C, To ensure that the switching power supply andledVoltage label consistency.

D,replaceledChip or module.

(C), the phenomenon: part of the lineledlight is not on

problem:A, The direction of the plug is correct.

B, The power output wiring is correct.

C, The power cord is reversed, reverse.

Solution:A, Pull out, re-correct the direction of the plug.

B, To ensure that the red line then positive, black line connected to the negative.

C, Find out some of the reverse line, re-connected.

(D), phenomenon: allledAre not bright

problem:A, Switching power supply without voltage output.

B, Switching power supply output wiring is correct.

C,ledLamp wiring voltage error.

Solution:A, Try to connect to the switching power supply input.

B, The power supply wiring is positive and negative is correct.

C, Check the power input port data is normal.

D, The power output port output data is normal.

E,make sureledThe input voltage of the lamp isDC12V;more than theDC12VThe voltage will burn the lamp

 

 

 lights string LED C9 strawberry lights

 lights string LED C9 strawberry lights

aeProduct.getSubject()

lights string LED C9 strawberry lights

lights string LED C9 strawberry lights

lights string LED C9 strawberry lights

lights string LED C9 strawberry lights


Hot Tags: lights string led c9 strawberry lights, China, manufacturers, suppliers, factory, made in China

Inquiry

You Might Also Like