LED lamp daily maintenance guide

- Apr 25, 2018-

First, the daily maintenance of LED lights

         After buying back the LED light, you should look carefully at the LED light's mark and read the installation instructions. Then follow the instruction manual to install and use the LED light. Otherwise, danger may occur.

         When the lamp is found to be red at both ends, the lamp is black or dark, and the lamp does not light up, the lamp should be replaced in time to prevent the ballast from being burned and unsafe.

         Do not switch frequently. Because the LED lights are frequently turned on, the current through the filaments is greater than the current during normal operation, so that the temperature of the filaments rises sharply to accelerate sublimation, which will greatly reduce its service life.

 

Second, how to clean LED lights

         1, in the cleaning and maintenance should pay attention not to change the structure of the LED lanterns, and do not just replace the LED lamp parts;

         2. After the cleaning and maintenance is over, the LED light should be installed as it is, and the components of the LED lamp should not be missed or replaced;

         3, the room lamp should always be wiped with a dry cloth, and pay attention to prevent moisture intrusion;

         4, the lights installed in the kitchen should pay special attention to smoke, light-colored lampshades better transparency, to be diligent in cleaning.