new TC420 TC421 time programmable 5 CH output led strip light controller, Widely used in aquariums, interior design and so on
There is an upper computer in the programmable time controller to make the load output change over time, the customer may customize schedule mode they want through the upper PC.
Then through the USB port to download required schedule to the controller.
The upper PC in addition to the function of editing schedule mode, it also can be setup time for the controller because of synchronous clock function of upper host.
If user want to see the schedule mode effect after editing, they can use fast sowing function of upper.
Because there is no delete function of the upper host, so the mode name display space will come into blank as long as you execute delete.
This controller can control load of led changing effect no more than five channels.
And it can be used in the occasion of the plant lights, light box advertising, the stage, home decoration, aquariums, etc.
Is this product has a feature "sunrise-sunset"? Namely, I need to in the aquarium LED lighting in the morning began to slowly Shine...eventually increasing to full power lamps, and in the evening (after a set time) - started a "sunset" that is, the gradual extinction of the lamps.
Yes, this controller can be a timmer to the light, to set it on or off at the setting time,
the setting time can be any time (min) in one day.
like: you can set 6:00 brightness-0%
note: If your set 6:00 @ 0% to 6:30 @ 100%, it will keep 0% from 6:00-6:29, then fade 0%-100% at the last min 6:29-6:30, or jump to 100% at 6:30 directly options.
* Brightness changing effect can be "Jump" and "Fade" between each two time points.
the setting time can be every half clock in one day.
like: you can set 6:00 brightness-0%
note: If your set 6:00 @ 0% to 6:30 @ 100%, it will fade 0% to 100% in 30min.
* Brightness changing effect can be "Fade" between each two time points.
* If you want keep light on 06:00-12:00, you need set each time point from 06:00 to 12:00.
does this product feature real time? For example disconnect the power supply, and after its inclusion is not necessary to re-configure (to set the time and date) for this product?
Yes, the controller can store the data when power off and power on again, you do not need to reset it.
there is two power sockets (DC jack and screw), could I connect two power supply at the same time to improve the power , to connect more lights ?
Sorry, connect two power supply to one controller at the same time is not allowed, it will damage the controller, or even break your power supply, PLEASE DO NOT DO THIS, thanks.
When your total output current <8A, you can power via DC socket, if >8A(DC12V~96W, DC24V~192W) please power them via screw!
What light can be powered by this controller?
DC12~DC24V constant voltage with dimmable function LED light.
How many light can be powered by this controller?
If your light is DC12V:
light on each CH should not above 48W, total output should not above 240W.
If your light is DC24V:
light on each CH should not above 96W, total output should not above 480W.
For TC421, if I connect my home network failed, and I can not find the wifi signal of the controller any more, what should I do?
Please long press MENU button untill it display "Set:softAP....", it will be reset, then you can find the wifi signal of the controller again.
What the name of TC421 wifi net?
If I do not have CD reader, where to get the software or APP ?
Please download the software and APP from our website, you can leave message to ask it, thanks.
<IMPORTANT> What can I do, if I can not program the controller successfull?
If you can not program your controller successfully, like :
* the programming software can not work well,
* the programming software can noy connet the controller,
* the programming software display wrong,
* you do not clear how to program it,
and so on, please contact us in time, we will help you to try another compatible version programming software or you can tell us your time line, we help you to creat it, you only need to download the file to controller, thanks.
as we know far, there may be some compatible issue with several language Windows , the program software in the CD may not work well on your compatible, but another version maybe work, please contact us first for help, thanks.
* TC420 and TC420 is same size.
①RESET:For the reset key, when the controller is dead, it can touch the key to the reposition, only for the chip reset, not the initialization reset.
For TC421, if you connect the network of your own router, please long press menu key to reset to AP mode, and try to connect again, thanks.
②USB:It is USB signal joint entrance, when epistatic machine model after editing, can through the USB line to download to the controller.
③POWER:It is DC plug, when the load power is small, can choose this port to input voltage.
① CH1: It is the load output first channel negative pole;
② CH2: It is the load output second channel negative pole;
③ CH3: It is the load output third channel negative pole;
④ CH4: It is the load output 4th channel negative pole;
⑤ CH5: It is the load output 5th channel negative pole;
⑥ V+: It is the load output positive pole;
⑦⑧V+.V-: It is power supply input positive and negative pole, when the load power is too large, you can choose this 2 port.
(Remark: you only need to choose one between power supply input DC port and this ⑦⑧port , and don't connect the two input way at the same time!)
How to add TC421 to your local WiFi network:
Welcome to contact for more dateil.Rihanna