This 2.4G 3 zone Touch Remote RGBW controller is human touch type and key control type universal RGB controller. Adopting the most advance PWM control technology, can control all kinds of 4 channel (common anode) and 5 wires LED lights. Such as LED module, led strip, led control box, led source,etc. This controller is easy to connected with wires and very simple to use. It is with synchronous indicating light and power off memory function. User can choose different changing mode, adjust the speed and brightness,turn on/off by the remote controlling. User can get flash effect, strobe effect, fade effect etc according to their demand .
● Remote Function introduction：
1、Use the 2.4G frequency RF remote control, no need to make the remote direct to the controller, and the RF remote can control it across obstacles.
2、In the open area remote control distance is about 30 meters.
3、Adopt touch control remote, slightly touch the color wheel can switch the light color easily and smoothly
● Operation method:
1、Connect the load wire at first, following by the power wire; Please make sure no short circuit between connecting wire before you turn on the power;
2、Only the ON button is effective in the OFF station, press the power button for the first time then controller will enter to the last mode before turn off the controller last time (memory off function).
3、Press ON button to start, then press mode button can switch the 9 modes as following：
|1||Red, Green, blue three colors flash|| |
Brightness is not adjustable, speed is adjustable
|2||Red, Green, blue three colors fade in and fade out|
|3||Seven color flash|
|4||Seven color gradient|
|5||White color fade in and fade out|
|6||Red color fade in and fade out+flash 3 times|
|7||Green color fade in and fade out+flash 3 times|
|8||Blue color fade in and fade out+flash 3 times|
4、When it is ring control status, press button, it will go back to latest selected mode.
5、Hold the“+”“-”can quickly adjust the speed and brightness level.
DIAGRAM & INSTALLATION
1. This products Input voltage is DC12-24V,other input voltage are not allowed.
2. Lead wire should be connected correctly,according to the wire color and the connecting diagram offers.
Overload are prohibited